SKU: MU0368
Model:Deep Blue

Description:
(1)BJF design ambient delay pedal
Deep Blue Delay (DBD) is a natural sounding digital/analog delay, with analog direct signal path. The DBD has about the same bandwidth as the classic tape echo units, and it can be used in front of an amplifier or in amplifier effects loops.
There are no noise reduction circuits, which keeps decay of echo as natural as possible.
(2)Controls
*LEVEL: Sets the level of delayed signal mixed with straight guitar tone, fully CCW there is only straight (un-effected) guitar signal heard and fully CW gives the loudest delay.
*DELAY: Controls the delay time from 25ms (fully CCW) to 600ms (fully CW)
*REPEAT: Controls the repeats of the delay signal, fully CCW gives one repeat and at fully CW you get infinite feedback.
(3)Electrical specifications
*Current consumption: 25 to 32 mA depending on delay setting
*Voltage range: 8V to 15V (below 7,5 V delay signal will be muted)
*Input impedance IZ: 180K Ohm's
*Output drive capability: 10K Ohms
*Maximum input voltage: 2V peak 650mV rms
*Signal to noise ratio: 80dB
*Delay time: approximately 25mS to 600mS
*Power requirement: supplied via 2,1 mm standard jack
*Input and output connections: via 1/4" Switchcraft
*Truebypass  Circuit design